Oil and Gas DTG Gyroscope

ER-DTG-E2:
1. Random drift (1σ): 0.5°/h;
2. Small size: φ29×52mm;
3. Strong shock resistance.

Share to:

Introduction

ER-DTG-E2 Oil and Gas DTG Gyroscope

Introduction

Oil and Gas DTG Gyroscope is designed specifically for the drilling fields. After solving many technical problems, its working temperature can now reach as high as 100 degrees Celsius.

In the drilling fields, inertial devices are greater and more adaptable than flying fields, because of its tough working conditions, especially the higher environmental temperatures. Therefore, the temperature of adaptation and life requirements are very serious.

Features

Working temperature up to 100 degrees Celsius

Better applied to the fields of drilling

Strong adaptability

Specifications

No.	Item	Parameter
1	Random Drift (1σ)	≤0.5°/h
2	Drift Stability (1σ)	≤0.5°/h
3	G-independent	≤12°/h
4	G-dependent	≤3°/h
5	Frequency Response	≥60Hz
6	Power Supply (Three Phase)	400Hz 12V
7	Power Supply (Single Phase)	16KHz 7V
8	Synchronous Speed	12,000
9	Power to Start Up	4 W
10	Operating Current	≤0.18 A
11	Synchronizing Time	≤10 S
12	Output Gradient	14 mv/’
13	Master torquer	7Ω
14	Vice control torquer	2Ω
15	Master torquer	≥500°/h/mA
16	Vice control torquer	≥10°/h/mA
17	Max. Tracking Speed	≥200 °/s
18	Output Non-linearity	≤0.1%
19	Lifetime	≥5000
20	Operating Temperature	-10~+100℃
21	Shock Overload (8ms)	≥50 g
22	Dimension	φ29×52 mm
23	Mounting flanges	30×30 mm
24	Weight	≤130 g