Low-Cost Voltage Type Single Axis Tilt Sensor
Introduction
ER-TS-4150VO Series tilt sensor is a low-cost single-axis voltage output inclination sensor. The output voltage is 0~5V, 0.5~4.5V, and 0~10V is optional. It is mainly aimed at the application market where the volume and cost are highly limited. Due to the built-in inclination unit of a new generation of MEMS production process, the finished product is small in size and low in power consumption. The consistency and stability of the MEMS process is very high, and its working temperature reaches industrial grade -40~+85℃, which is a cost-effective tilt module.
The product adopts the principle of non-contact measurement, which can output the current attitude and inclination in real time. It is simple to use, and there is no need to find the two surfaces that change relative to each other. The advantages of small size, resistance to external electromagnetic interference and strong impact resistance make it an ideal choice for the attitude measurement of industrial equipment platforms.
Features
Single axis tilt monitoring
Full range accuracy 0.1°, resolution 0.01°
Output: 0-5V, 0.5~4.5V, 0-10V (optional)
Wide voltage input DC 9~36V
Wide temperature working -40~+85℃
Measuring range: 0~±180° (optional)
High vibration resistance>3500g
IP67 Protection
Can output RS232 at the same time
Small volume (90*40*27mm) (customizable)
Applications
Railway gauge
Satellite solar antenna positioning
Tractor, deep ploughing farm machine
Mining machinery, oil logging equipment
Medical equipment
Tripod head levelling
Hydraulic lifting platform
Tilt based monitoring
Various construction machinery angle control
Inspection of bridges and dams
Specifications
Parameters | Conditions | ER-TS-4150VO-10 | ER-TS-4150VO-30 | ER-TS-4150VO-60 | ER-TS-4150VOU-90 | Unit |
Measuring range | / | ±10 | ±30 | ±60 | ±90 | ° |
Measuring axis | Y-axis is optional | X | X | X | X | / |
Zero temperature drift | -40~85° | ±0.01 | ±0.01 | ±0.01 | ±0.01 | °/℃ |
Sensitivity temperature coefficient | -40~85° | ≤150 | ≤150 | ≤150 | ≤150 | ppm/℃ |
Zero drift | 0° output | 0~5V output -2.5V, 0~10V output -5V | V | |||
Frequency response | DC response | 100 | 100 | 100 | 100 | Hz |
Resolution | Bandwidth 5Hz | 0.01 | 0.01 | 0.01 | 0.01 | ° |
Accuracy | -40~85℃ | 0.1 | 0.1 | 0.1 | 0.1 | ° |
Long term stability | -40~85℃ | <0.12 | ° | |||
Power on time | / | 0.2 | 0.2 | 0.2 | 0.2 | s |
Response time | / | 0.01 | 0.01 | 0.01 | 0.01 | s |
Average failure-free work | ≥55000hours/time | |||||
Output mode | 0~5V, 0.5~4.5V, 0~10V selectable | |||||
Shock resistance | 3500g, 0.5ms, 3 times/axis | |||||
Anti-vibration | 10grms, 10~1000Hz | |||||
Insulation resistance | ≥100MΩ | |||||
Waterproof level | IP67 | |||||
Cables | Standard 1.5M length, wearproof, grease proofing, wide temperature, shielded cables 6*0.3mm² | |||||
Weight | 145g (without packing box) |
Application Techniques
1.The Difference between Tilt Sensor and Gyro Sensor
3.How to install the tilt sensor?
4.What are Tilt Switches and Tilt Sensors?
5.Do you Know the Working Principle of Inclinometer ?
6.How to Use the Tilt Sensor and How to Install It?