Voltage Type High Precision Contactless Angle Sensor

ER-AS-20 Features:
1. Sampling rate: 1K HZ;
2. Full range accuracy 0.1°;
3. Output 0~5V, 0~10V optional.

Share to:

Introduction

Voltage Type High Precision Contactless Angle Sensor

Introduction
The ER-AS-20 angle sensor is embedded with a microprocessor and combined with a CNC angle second-level calibration device. Through program calibration and conversion, it can achieve 0-10V, 0-5V, 0.1 high-precision measurement.
The magnetic sensitive angle sensor has the characteristics of non-contact, long life, high resolution, low temperature drift, good linearity, fine reset, high frequency response, multiple protections, anti-interference, anti-vibration, and anti-shock characteristics, that is suitable for water, oil, gas, vibration, shock, especially harsh industrial environments, are also ideal alternatives to contact angle sensors (such as conductive plastic potentiometers).

Features
Sampling rate: 1K HZ
Full range accuracy 0.1°
Output 0~5V, 0~10V optional
Wide voltage input DC 9~36V
Wide temperature working -40~+85℃
Angular resolution 0.022°
High vibration resistance>20000g
IP66 protection level
Range 0~360°(optional)
Linearity is 0.15%~0.5%

Applications
Railway gauge
Satellite solar antenna positioning
Towed motor control
Mining machinery, oil logging equipment
Medical equipment
Liquid valve: angle actuators
Angle-based control
Various construction machinery angle control
Textile machinery

Specifications

Parameter	Condition	ER-AS-20-90	ER-AS-20-180	ER-AS-20-270	ER-AS-20-360	Unit
Measuring range	/	0~90	0~180	0~270	0~360	°
Temperature drift	-40~85°	±0.01	±0.01	±0.01	±0.01	°/℃
Zero offset	The output of 0°(Left-right approximation)	0	0	0	0	mA
Frequency response	DC response	100	100	100	100	Hz
Resolution	/	0.022	0.022	0.022	0.022	°
Precision	-40~85℃	0.1	0.2	0.3	0.5	°
Long-term stability	-40~85℃	0.12	0.21	0.35	0.55	°
Output interface	/	0~5V, 0~10V optional
Power on start time	/	0.2	0.2	0.2	0.2	s
The response time	/	0.01	0.01	0.01	0.01	s
Average working time	≥55,000 hours/time
Impact resistant	20000g, 0.5ms, 3 times/shaft
Shock resistant	10grms, 2~2000Hz
Working temperature	-40~85℃
Waterproof level	IP66
Cable	Standard 1.5m length, wear resistance, oil proof, wide temperature, shielding cable 3*0.3mm²
Weight	180g (excluding boxes)

Electrical indicators

Parameters	Condition	Min	Typical Value	Max	Unit
The power supply voltage	/	9	12	36	V
Working current	/	/	20	/	mA
Reverse power protection	/	/	40	/	V
Signal reverse protection	/	/	40	/	V
The output load	Resistivity	/	2	/	KΩ
Working temperature	/	-40	/	85	℃
Storage temperature	/	-55	/	100	℃