Ericco provides high reliability and low cost GPS/BEIDOU/GLONASS Satellite Positioning/Orientation/Timing/Navigation Module to the customers worldwide, the quality and after service are proven to be well guaranteed. Just come and get more details with us.
ER-GNSS-M02
1. Equipped with a high-precision RTK algorithm engine;
2. Easy to achieve centimeter-level positioning;
3. Small size, low power consumption, easy system integration.
ER-GNSS-M03
1. Suppression technology;
2. Support interference detection and deception detection;
3. Support single star timing.
ER-GNSS-M04
1.Universal size GNSS module, hardware compatible with previous products, mainstream
GPS module, easy to replace;
2. Excellent navigation and positioning performance, supporting single system independent;
3. Positioning and multi-system joint positioning.
ER-GNSS-M05
1. Ultra-small package;
2. Compact design and small size;
3. Low power design.
ER-GNSS-M06/M07
1. Vehicle gauge level dual-frequency navigation positioning module;
2. Support four systems L1+L2 or L1+L5 work at the same time;
3. Support original observation output.
ER-GNSS-M08
1. Support dual-frequency multi-system on-chip RTK positioning solution;
2. RTK update rate up to 10Hz;
3. Supports four systems L1+L2 or L1+L5 working simultaneously.
ER-GNSS-M09
1. Integrated GNSS SoC chip based on the latest generation of NebulasIV RF Base-band;
2. 16x12x2.4mm surface mounting;
3. Size compatible with the car market mainstream GNSS module products.
ER-GNSS-M10
1. Based on the latest generation of NebulasIV RF baseband;
2. 17x22x2.6mm surface mount;
3. Support full-system full-frequency on-chip RTK positioning solution.
ER-GNSS-M11
1. Dual-RTK Dual-RTK engine technology;
2. 16x21x2.6mm surface mount;
3. Support full-system full-frequency on-chip RTK positioning.
ER-GM-440 Features:
1. 30×40mm size, single-sided surface mount module;
2. RTK initialization time is better than 5s, supporting RTK calculation over 20km;
3. 20Hz high data output rate;
4. Adaptable to low-cost active ceramic antennas.
ER-GM-442 Features:
1. 30×40mm size, single-sided surface mount module;
2. RTK initialization time is better than 5s, support RTK solution above 20km;
3. 10Hz high data output rate.
ER-GM-4B0 Features:
1. New nebulas-II high-performance SoC chip;
2. Full system multi-frequency RTK;
3. Supports up to 20Hz data output rate;
4. Integrated 6-axis MEMS chip, autonomous integrated navigation.
ER-GM-482 Features:
1. Adaptive recognition of differential input RTCM format;
2. Support BDS B1/B2+GPSL1/L2+GLONASS L1/L2+GALILEO E1/E5b+QZSS L1/L2;
3. Dual antenna input, support antenna signal detection MEMS onboard navigation.
ER-GM-220-III L Features:
1. BDS: 0.2 m/s;
2. Re-capture: <1s 1PPS 20ns;
3. Data update rate 1Hz;
4. Size 17×22.4×2.4mm.
ER-GM-220-III L2 Features:
1. Standing wave ratio: ≤1.5;
2. Input resistance: 50Ω;
3. Antenna gain: 0~30dB;
4. Size: 22.4*17.0*2.4mm.
ER-GM-220-INS Features:
1. Size 12.2×16×2.4mm;
2. Package 24-pin, SMD surface mount;
3. Hot start: 1s sensitivity BDS GPS;
4. Re-capture: <1s tracking -160dBm -160dBm.
ER-GM-220-III NV Features:
1. Size: 6.0×12.2×2.4mm;
2. Package: 24-pin, SMD surface mount;
3. Ulti-system joint positioning 1PPS support;
4. First time (TTFF): Cold start: 30s Sensitivity BDS GPS.
ER-GM-220-III N Features:
1. Frequency: 1559-1577MHz;
2. Standing wave radio: ≤1.5;
3. Input impedance: 50Ω.
