Introduction
ER-EC-385CAN 80° is a high-precision 3D electronic compass that uses hard and soft iron calibration algorithms to provide high-precision heading information over an inclination range of 80°. It has the characteristics of small size and low power consumption, which is more suitable for power consumption volume sensitive measurement systems.
The precise attitude of the product output carrier can be used in the system of full attitude rotation. This product comes with hard magnetic, soft magnetic and inclination compensation, and the compass outputs calibrated high-precision measurements. The three-axis fluxgate technology is integrated, the course is calculated by the central processor in real time, and the tilt angle is compensated by the three-axis accelerometer, so that it can provide accurate course data even in the extremely harsh environment. With small size and low power consumption, it is widely used in many fields such as oil logging, antenna pointing, vehicle navigation and attitude system.
Main characteristics
Measuring range 0~360°
Heading accuracy 0.5°, tilt range ±80°
Industrial grade design
Input voltage DC 5V
Wide temperature operation -40~+85℃
With hard magnetic, soft magnetic and inclination compensation
The baud rate ranges from 2400 to 115200
Working current 40mA
IP67 protection grade
Low output RS232 / RS485 / TTL/MODBUS/CAN (optional)
Small size (60*59*29mm)(customizable)
Application
Individual combat equipment
Satellite solar antenna positioning
AGV car
Mining machinery, oil logging equipment
Medical equipment
Leveling the head
UAV positioning and navigation
Tilt-based monitoring
Various engineering machinery angle control
Bridge dam monitoring
Specifications
| Compass heading parameter | Heading accuracy | 0.5°(Pitch<40°) |
| 0.7°( Pitch<60°) | ||
| 1°( Pitch<80°) | ||
| Resolution | 0.01° | |
| Repeatability | 0.1° | |
| Compass tilt parameter | Pitch accuracy | 0.1° |
| Roll accuracy | 0.1° for pitch<80° | |
| Dip resolution | 0.01° | |
| Tilt range | ±80° | |
| Calibration | Hard iron calibration | Yes |
| Soft iron calibration | Yes | |
| Tilt calibration | Yes | |
| Physical property | Size | L60 x W59 x H29(mm) |
| Weight | 180g | |
| Interface connector | Six needles | |
| Interface characteristics | Startup delay | <50ms |
| Maximum sampling rate | 50 times/s | |
| Communication rate | 100~500K bps baud rate | |
| CAN communication | Optional | |
| CANopen communication | Optional | |
| Output format | Binary high performance protocol | |
| Power Supply | Support voltage | DC+5V |
| Current (maximum) | 40mA | |
| Working mode | 35mA | |
| Environment | Storage temperature | -40℃--+125℃ |
| Working temperature | -40℃--+85℃ | |
| Vibration resistance | 3000g |