E-mail: info@ericcointernational.com
Tel: +8613992884879

ER-F-01 Dynamic and static dual mode tilt sensor

The main features:
●Dynamic dip measurement
●Range + 1 to + 90 ° for optional
●Output way MODBUS
●DC 9~36V Wide voltage input
●Wide working temperature-40~+8
●Resolution ratio 0.01
●IP67 Protection grade
●High vibration resistance>2000g
●Direct lead interface
●Size:72.62×42×23.1mm(can be customized)

Send InquiryChat Now
ER-F-01 Dynamic and static dual mode tilt sensor

 

ER-F-01 Dynamic and static dual mode tilt sensor


f04_.jpg

 


Product introduction

          ER-F-01 is the dynamic and static dual-mode dip sensor of MODBUS output, integrated dynamic and static dual-mode combination algorithm, launched by the RION company in the field of industrial field control. According to different working environment, the product is automatically switched to dynamic and static measurement mode. Ensure high accuracy measurement in various working environments. When the working environment is in static mode, static algorithm will be adopted in the dipmeter; when the working environment is in dynamic mode, dynamic algorithm will be adopted in the dipmeter, which can not only maintain the static high precision, but also ensure the dynamic high precision measurement of objects. RS485 hardware differential bus is used to transmit data. A high-precision 16bit A/D differential converter is built in, and the sensor output tilt and pitch Angle relative to the horizontal surface can be measured through the 5-order filtering algorithm. Due to the inbuilt ADI's high-precision digital temperature sensor, the temperature drift of the sensor can be corrected according to the change of the inbuilt temperature sensor to guarantee the high repeatability of the product in the low temperature and high temperature environment. The output response frequency standard can reach 18Hz. If higher response frequency is needed, our company can customize it according to users. The product is a real industrial grade product with reliable and stable performance and good expansibility. Suitable for all kinds of harsh industrial control environment.


The main features
●Dynamic dip measurement  
●Range + 1 to + 90 ° for optional 
●Output way MODBUS
●DC 9~36V Wide voltage input
●Wide working temperature-40~+8
●resolution ratio 0.01°
●IP67 Protection grade
●High vibration resistance>2000g 
●Direct lead interface
●Size:72.62×42×23.1mm(can be customized)

 

The product application

●Satellite dishes search the stars

●Railway locomotive monitoring

●All kinds of engineering machinery dip measurement

●Petroleum drilling equipment

●Radar vehicle platform detection

●Attitude navigation of underground drill

●Measurement of initial firing Angle of gun barrel

●Directional measurement based on dip Angle

●Satellite communications vehicle attitude detection

●Measurement of navigation posture of ships

●Shield pipe jacking application

●Slope monitoring of geological equipment


Product performance index

Parameter

    Conditions

  ER-F-01

Unit

Range of measurement


±10

±30

±60

±90

°

Measurement axis


X Y 

X Y 

X Y 

X Y 


Resolution ratio


0.01

0.01

0.01

0.01

°

Static accuracy

@25℃

0.02

0.05

0.08

0.1

°

Dynamic accuracy

@25℃

0.3

0.3

0.3

0.5

°

Long-time stability


0.05

0.05

0.05

0.05


Zero temperature coefficient

-40~85°C

±0.006

±0.006

±0.006

±0.006

°/℃

Temperature coefficient of flexibility

-40~85°C

≤100

≤100

≤100

≤100

ppm/℃

Power on start time


0.5

0.5

0.5

0.5

S

Response time


0.02

0.02

0.02

0.02

s

Output rate

10Hz、25Hz、50Hz Can be set up

Output signal

MODBUS

Electromagnetic compatibility

According to EN61000 and GBT17626

 MTBF

≥50000 H/T

Insulation resistance

≥100 M

Impact resistant

100g@11ms、Three axis and with(A half sine wave)

Anti-Vibration

                    10grms、10~1000Hz

Waterproof level

IP67

Cable

Standard 1 m length, wear - resistant, oil - proof, wide temperature, shielded cable 4*0.4mm2

Weight

                             120g(not include cable)

 

Electrical parameters of products

              Parameter

    Conditions

         Minimum 

  Typical values

    Maximum

Unit

   The power supply voltage

                            Standard

9

12、24

36

V


       Options


5


V

        Working current

No load


40


mA

        Working temperature


-40


+85

       Storage temperature


-55


+125

 

Product mechanical parameters

Connectors: 1m straight leads (customizable)
Protection class: IP67
Material: aluminum alloy grinding sand oxidation
Installation: three M4 screws


Operating principle
The core control unit imported from Europe is adopted. Using the principle of earth gravity, when the inclined Angle unit is tilted, the earth gravity will produce the component of gravity in the corresponding pendulum hammer, and the corresponding capacitance will change. Through amplification, filtering and transformation of the capacitance, the inclination can be obtained.

 

If interested, please contact us  info@ericcointernational.com                                                                        

ERICCO is expert in high quality borehole wireless mwd manufacturing and selling, who is one of the best manufacturers and suppliers of borehole wireless mwd with high precision. We have a professional factory at your service.

 

Hot Tags: ER-F-01 Dynamic and static dual mode tilt sensor manufacturers, suppliers, factory, high precision
Related Products
Leave Message
Your privacy is important to us - we never sell or share your information.