Categories
Contact Us

Ericco International Limited

  1. Linkedin:www.linkedin.com/in/amy-guo-8877a354/

  2. Facebook:www.facebook.com/ericco.swift.5

  3. Mobile   : +8613992884879
    E - mail  : info@ericcointernational.com

  4. Wechat  : 13992884879

  5. S k y p e: Ericco167

Inclinometer

ER-D-11 CAN2.0B Output Biaxial Tilt Sensor

ER-D-11 CAN2.0B Output Biaxial Tilt Sensor

Main Features:
•Two axis inclination Measurement;
•Range±1~±90° for optional;
•Accuracy: refer to performance table;
•DC9~36V Wide voltage input input;
•Wide working temperature-40~+85℃;
•Resolution 0.01 °
•IP67 protection grade;
•High vibration resistance >2000g;
•Direct lead interface;
•Size 66 x 44 x 24mm (customizable);
•Output mode:CAN2.0B;
...
Chat Now


Product Introduction

ER-D-11 is a CAN2.0B output single-axis tilt sensor for industrial field control. It adopts industrial standard isolated CAN transceiver and built-in high-precision A/D differential converter. Through the 5-order filtering algorithm, it CAN measure the sensor output tilt and pitch Angle relative to the horizontal surface.

Due to the inbuilt ADI's high-precision digital temperature sensor, the temperature drift of the sensor can be corrected according to the change of the inbuilt temperature sensor to guarantee the high repeatability of the product in the low temperature and high temperature environment. The output response frequency standard can reach 100Hz. If higher response frequency is needed, our company can customize it according to users. The product is a real industrial grade product with reliable and stable performance and good expansibility. Suitable for all kinds of harsh industrial control environment.

CAN2.0B output biaxial tilt sensor.jpg

Main Features

•Dual axis inclination Measurement                                               •Range±1~±90° for optional

•Accuracy: refer to performance table                                           •DC936V Wide voltage input input

•Wide working temperature-40+85℃                                         •Resolution 0.01 °  

•IP67 protection grade                                                                   •High vibration resistance >2000g                                          

•Direct lead interface                                                                     •Size 66 x 44 x 24mm (customizable)

•Output mode:CAN2.0B


Product application

•Satellite dishes search the stars 

•Railway locomotive monitoring

•All kinds of engineering machinery dip measurement

•Petroleum drilling equipment

•Radar vehicle platform detection

•Attitude navigation of underground drill

•Measurement of initial firing Angle of gun barrel

•Directional measurement based on dip Angle

•Satellite communication vehicle attitude detection

•Measurement of navigation posture of ships

•Shield pipe jacking application

•Slope monitoring of geological equipment

 

Product performance index

Parameter

Condition

ER-D-11-10

ER-D-11-30

ER-D-11-60

ER-D-11-90

Unit

Measurement Range


±10

±30

±60

±90

°

Measurement Axis


X Y

X Y

X Y

X Y


Absolute Accuracy

@25℃

0.02

0.05

0.08

0.1

°

Long-term Stability


0.05

0.05

0.05

0.05


Zero Temperature Coefficient

-40~85°

±0.006

±0.006

±0.006

±0.006

°/℃

Sensitivity Temperature Coefficient

-40~85°

≤100

≤100

≤100

≤100

Ppm/℃

Power on start time


0.5

0.5

0.5

0.5

S

Response Time


0.02

0.02

0.02

0.02

s

Output Rate

5Hz, 15Hz, 35Hz,50Hz and 100Hz can be set

Output Signal

CAN2.0B bus

Electromagnetic Compatibility

According To EN61000 And GBT17626

 

 MTBF

≥50000hours/time

Insulation Resistance

≥100Ω

Impact Resistant

100g@11msTriaxial harmony (half normal)

Resistance To Vibration

10grms10~1000HZ

Waterproof Level

IP67

Cable

Standard: 1 meter length, wear resistance, oil proof, wide temperature, shielding cable 4*0.4mm2

Weight 

80g(No cable)


Electrical parameters of products

              Parameter

         Condition

  Minimum Value

 Typical Value

 Maximum Value

  Unit

          Supply Voltage

        Standard

             9

        1224

            36

    V


Can be customized


           5


    V

        Working Current 

          no load


          40


  mA

    Operating Temperature 


           -40


            +85

   ℃

      Storage Temperature 


           -55


            +125

   ℃


Product mechanical parameters 

• Connector: 1m straight leads (customizable)

• Protection class: IP67

• Material: aluminum alloy grinding sand oxidation

• Installation: four M3 screws

 

If interested, please contact us info@ericcointernational.com                                                                   


ERICCO is expert in high quality borehole wireless mwd manufacturing and selling, who is one of the best manufacturers and suppliers of borehole wireless mwd with high precision. We have a professional team at your service.


Hot Tags: er-d-11 can2.0b output biaxial tilt sensor manufacturers, suppliers, factory, high precision
  • Newsletter
  • Categories
  • Contact Us

    Ericco International Limited

    1. Linkedin:www.linkedin.com/in/amy-guo-8877a354/

    2. Facebook:www.facebook.com/ericco.swift.5

    3. Mobile   : +8613992884879
      E - mail  : info@ericcointernational.com

    4. Wechat  : 13992884879

    5. S k y p e: Ericco167

  • QR Code
  • Copyright © Ericco International Limited All rights reserved.