Categories
Contact Us

Ericco International Limited

  1. Linkedin:www.linkedin.com/in/amy-guo-8877a354/

  2. Facebook:www.facebook.com/ericco.swift.5

  3. Mobile   : +8613992884879
    E - mail  : info@ericcointernational.com

  4. Wechat  : 13992884879

  5. S k y p e: Ericco167

Inclinometer

ER-D-10 Digital Output Dual - Axis Inclination Sensor

ER-D-10 Digital Output Dual - Axis Inclination Sensor

Main Features:
•Two Axis Inclination Measurement;
•Range±1~±90° for optional;
•Accuracy: refer to performance table;
•DC9~36VWide voltage input;
•Wide working temperature-40~+85℃
•Resolution 0.01 °;
•IP67 protection grade;
•High vibration resistance >2000g;
•Direct lead interface;
•Size 91 x 40 x 26mm (customizable);
•Output mode RS232/RS485/RS422/TTL/PWM/CAN optional;
...
Chat Now

 

Product Introduction

ER-D-10 is a dual-axis inclination sensor with serial port output type for industrial field control. A high-precision A/D differential converter is built in, and the 5-order filtering algorithm is adopted to measure the sensor output tilt and pitch Angle relative to the horizontal surface.Output interfaces RS485, RS232, RS422, TTL, CAN, MODBUS are available.

 Due to the inbuilt ADI's high-precision digital temperature sensor, the temperature drift of the sensor can be corrected according to the change of the inbuilt temperature sensor to guarantee the high repeatability of the product in the low temperature and high temperature environment.The output response frequency standard can reach 18Hz. If higher response frequency is needed, our company can customize it according to users.The product is a real industrial grade product with reliable and stable performance and good expansibility.Suitable for all kinds of harsh industrial control environment.

 digital output twin - axis inclination sensor.jpg

Main Features

•Dual Axis Inclination Measurement                                                •Range±1~±90° for optional

•Accuracy: refer to performance table                                            •DC936VWide voltage input

•Wide working temperature-40+85℃                                          •Resolution 0.01 °  

•IP67 protection grade                                                                    •High vibration resistance >2000g                                          

•Direct lead interface                                                                      •Size 91 x 40 x 26mm (customizable)

•Output mode RS232/RS485/RS422/TTL/PWM/CAN optional  

 

Product application

•Satellite dishes search the stars•Railway locomotive monitoring

•All kinds of engineering machinery dip measurement•Petroleum drilling equipment

•Radar vehicle platform detection•Attitude navigation of underground drill

•Measurement of initial firing Angle of gun barrel

•Directional measurement based on dip Angle

•Satellite communication vehicle attitude detection

•Measurement of navigation posture of ships

•Shield pipe jacking application

•Slope monitoring of geological equipment

 

 

Product performance index

Parameter

Condition

ER-D-10-10

ER-D-10-30

ER-D-10-60

ER-D-10-90

    Unit

Measurement Range


±10

±30

±60

±90

      °

Measurement Axis


X Y

X Y

X Y

X Y


Absolute Accuracy

@25℃

0.02

0.05

0.08

0.1

      °

Long-term Stability


0.05

0.05

0.05

0.05


Zero Temperature Coefficient

-40~85°

±0.006

±0.006

±0.006

±0.006

     °/℃

Sensitivity Temperature Coefficient

-40~85°

≤100

≤100

≤100

≤100

  Ppm/℃

Power on start time


0.5

0.5

0.5

0.5

       S

Response Time


0.02

0.02

0.02

0.02

       S

Output Rate

5Hz, 15Hz, 35Hz,50Hz and 100Hz can be set

Output Signal

RS232/RS485/RS422/TTL/PWM/CAN/MODBUS

Electromagnetic Compatibility

According To EN61000 And GBT17626

 

 MTBF

≥50000hours/time

Insulation Resistance

≥100Ω

Impact Resistant

100g@11msTriaxial harmony (half normal)

Resistance To Vibration

10grms10~1000HZ

Waterproof Level

IP67

Cable

Standard: 1 meter length, wear resistance, oil proof, wide temperature, shielding cable 4*0.4mm2

Weight 

120g(No cable)

 

Electrical parameters of products

              Parameter

          Condition

 Minimum Value

 Typical Value

Maximum Value

  Unit

           Supply Voltage

          Standard

            9

      1224

             36

    V


 Can be customized


           5


    V

        Working Current 

           no load


          40


  mA

    Operating Temperature 


         -40


            +85

   ℃

      Storage Temperature 


         -55


            +125

   ℃


Product mechanical parameters

• Connector: 1m straight leads (customizable)

• Protection class: IP67

• Material: aluminum alloy grinding sand oxidation

• Installation: four M6 screws

 

If interested, please contact us info@ericcointernational.com                                                                    


ERICCO is expert in high quality borehole wireless mwd manufacturing and selling, who is one of the best manufacturers and suppliers of borehole wireless mwd with high precision. We have a professional team at your service.


Hot Tags: er-d-10 digital output dual - axis inclination sensor manufacturers, suppliers, factory, high precision
  • Newsletter
  • Categories
  • Contact Us

    Ericco International Limited

    1. Linkedin:www.linkedin.com/in/amy-guo-8877a354/

    2. Facebook:www.facebook.com/ericco.swift.5

    3. Mobile   : +8613992884879
      E - mail  : info@ericcointernational.com

    4. Wechat  : 13992884879

    5. S k y p e: Ericco167

  • QR Code
  • Copyright © Ericco International Limited All rights reserved.