Small Size Digital Output Two Axis Tilt Sensor

ER-TS-4256DI1 Features:
1. Biaxial tilt monitoring;
2. Wide voltage input DC 9~36V;
3. Full range accuracy 0.1°, resolution 0.01°.

Share to:

Introduction

Small Size Digital Output Two Axis Tilt Sensor

Introduction
ER-TS-4256DI1 is a new generation of digital small volume MEMS tilt sensor, with built-in dual channel earth gravity tilt unit, which can be converted into inclination change by measuring static gravity acceleration. Thus the tilt and pitch angle of the sensor output relative to the horizontal plane can be measured. The output mode has RS232, RS485 or TTL, MODBUS level interface to choose from. Due to the built-in MCU control system, the output linearity of the sensor has been corrected twice to make up for the loss of accuracy caused by the lack of analog correction.
The product adopts non-contact measurement original quantity, which can output the current attitude inclination in real time. The operation is simple, and there is no need to retrieve the two sides of the change. It can resist external electromagnetic interference and adapt to harsh industrial environment for long-term work, so it is an ideal choice for industrial automation control and platform attitude measurement. It has strong resistance to external electromagnetic interference and can be adapted to work in harsh industrial environment for a long time.

Features
Biaxial tilt monitoring
Full range accuracy 0.1°, resolution 0.01°
Industrial grade design
Wide voltage input DC 9~36V (5V can be customized)
Wide temperature working -40~+85℃
Range 0~±90°(optional)
High vibration resistance>3500g
The baud rate is adjustable from 2400~115200
IP67 protection level
Output RS232/RS485/TTL/MODBUS (optional)
Small volume (90*40*27mm) (customizable)

Applications
High voltage power line tower pole monitoring
Satellite solar antenna positioning
Tractor, deep tillage machinery
Mining machinery, oil logging equipment
Medical equipment
Hydraulic lifting platform
Tilt based monitoring
Various construction machinery angle control
Inspection of bridges and dams

Specifications

Parameter	Condition	ER-TS-4256DI1-10	ER-TS-4256DI1-30	ER-TS-4256DI1-60	ER-TS-4256DI1-90	Unit
Measuring range	/	±10	±30	±60	±90	°
Measurement of shaft	/	X, Y Axis	X, Y Axis	X, Y Axis	X , Y Axis	/
Zero temperature drift	-40~85°	±0.01	±0.01	±0.01	±0.01	°/℃
Sensitivity temperature coefficient	-40~85°	≤150	≤150	≤150	≤150	ppm/℃
Frequency response	DC response	100	100	100	100	Hz
Resolution	Bandwidth 5Hz	0.01	0.01	0.01	0.01	°
Precision	-40~85℃	0.1	0.1	0.1	0.1	°
Long-term stability	-40~85℃	<0.12				°
Power on start time	/	0.2	0.2	0.2	0.2	s
The response time	/	0.01	0.01	0.01	0.01	s
Rate	5Hz output, 15Hz, 35Hz, 50Hz and 100HZ can set (RS485 does not have this function)
The output signal	RS232 / RS485 / RS422 / TTL/PWM/CAN/MODBUS can order
Average working time	≥55,000 hours/time
Impact resistant	3500 g, 0.5 ms, 3 times/shaft
Shock resistant	10grms, 10~1000Hz
Insulation resistance	≥100 mΩ
Waterproof level	IP67
Cable	Standard 1.5 m length, wear resistance, oil proof, wide temperature, shielding cable 4*0.2mm²
Weight	145g (excluding boxes)